Protects you, your can, and your equipment. Designed to prevent mirage from obscuring your site picture after multiple shots. Eliminating mirage is accomplished by the use of insulating materials - your can heats up, but the SAS stays cool. The outer shell of the TAB SAS will not heat up so your equipment and person will not become damaged with accidental or intentional contact. Removal and handling of your can, while inside the TAB SAS, immediately after firing is possible due to the high quality insulating materials used in the construction.
NOTE: ALL SAS COVERS ARE CUSTOM MADE TO YOUR SPECIFICATIONS AND CANNOT BE RESOLD OR MODIFIED. PLEASE MAKE SURE YOU SUBMIT THE CORRECT MEASUREMENTS FOR YOUR COVER. ALLOW 14-21 DAYS FOR THE COVER/COVERS TO BE MADE AND SHIPPED.
Warning - .223/5.56 Cal UsersOur current products are not recommended for long strings or rapid fire use with a .223/5.56 caliber rifle! We are in the process of developing new products that will meet the needs of these type of shooters.
Model SAS1: This model opens down the length of the suppressor and is held closed with a strip of Velcro. The cover must be installed with the label to the rear, toward the shooter.
Model SAS2: A fully enclosed tube of protective material, with shock cord sewn into each end. The shock cord makes this cover a little more difficult to install and remove but this model was designed for this purpose. The advantage is that there is no right or wrong way to install this cover, simply put it on and go. This model was designed for the person who may be stalking and doesn't want the cover to slide back onto the barrel exposing the metal can to making noise should it come in contact with hard surfaces.
Model SAS3: A fully enclosed tube of protective material. This cover must be installed with the label to the rear, toward the shooter. This cover was designed to make a smaller more compact model than the SAS1 yet still be able to effortlessly slide the cover off of the can onto the barrel to allow the can to cool in between shot strings, as well as being very easy to install back onto the can when shooting begins again.
Model HS clip SAS is made for those suppressor that attach with a horseshoe clip. It is a slip on model that has a velcro tab that goes around the horseshoe clip to hold in place.
Whatever length you provide when an order is placed, we remove 1/4" from that length when we make the product. Why do we do this? In the past we made our covers the exact length of the can. As the cover gets older it will stretch a small amount and hang over the front of the can. When this happens the muzzle blast will shred the black inner material and the customer is not a happy camper and we end up replacing the cover. Since we've begun the process of removing 1/4" from the length the reports of shredded muzzles has greatly diminished and the mirage mitigating capabilities of the cover has not been reduced.
The prices listed on the site are for normal configured suppressors. What this means is that the suppressor has one diameter, and one length.
If the suppressor has different diameters, or steps, along the length of the suppressor this is not a standard suppressor and will entail custom design charges. If your weapon system has less than .75” in between the rear of the suppressor and the stock, rail, etc. then our standard suppressor covers will not work, EXCEPT THE SASR, and we will need to discuss custom options with you to determine what will need to be done to make a cover for your system. There are many methods that we have used over the years to make custom suppressor covers that have specific design limitations in the way they are installed, and we are more than happy to design a cover just for you. The minimum fee on custom designed suppressor covers will be $25.00 and could go up from there depending on the complexity of the design and options that the customer wants. If you place an order for a standard cover and when the suppressor cover is delivered it does not fit your suppressor for whatever reason, we will be happy to work with you to make a cover that will fit at no extra cost to you, except shipping. HOWEVER, the cover needs to be returned to us in new condition that will enable us to resell it. Custom made covers are just that, custom, and no refunds will be offered for them since we are unable to resell them.
*Brings up your info and the info for all past purchases.
*We'll remember your info the next time you return.
Please provide the size information below to insure that we manufacture your suppressor cover as fast and accurately as possible.
DO NOT PROVIDE MEASUREMENTS FROM A WEB SITE.Please measure your actual suppressor!
The SAS covers are considered a "custom" item. Please give us 14-21 days to get your cover made and shipped out to you.
Please choose the style of cover you would like:
Is the diameter of your suppressor 1.75" (44mm) or greater?(Sizes 1.75 and greater additional $10)
How would you like to enter your dimensions?
Please give us the diameter of your suppressor in inches:*Note the diagrams for proper measurement.
Please give us the diameter of your suppressor in millimeters:*Note the diagrams for proper measurement.
Length in inches:
Length in centimeters:
Please choose the color you would like from the drop down list.
Would you like to add Bungee retention? (Adds $12)
This screen shows you the details for the selected product.
Click the "Add to Cart" button to add this product to your shopping cart. You can enter a quantity larger then 1 to add multiples of this product to your shopping cart.
If the product is full you will see a "Wait List" button. Click this button if you would like to be notified if/when capacity is added. If capacity is increased we will email you. Upon receipt of the increased capacity notification, registration will be on a first-come, first-served basis.
If the product is not ready for purchase you will see a "Notify Me" button. You can click this button if you would like to be notified when this product is ready for purchase.
Some products can only be purchased through our partner. In this case you will see an "External Register" button. Click this button to purchase through our partner's website.